VEEM Prop Puller

VEEM Prop Pullers for Sale – USA & International Delivery

VEEM Prop Puller is a precision-engineered inboard propeller puller tool made to install and remove marine propellers cleanly and safely from their shafts. It’s designed for boats with standard tapered propeller shafts (typically from about 1 ¾″ up to larger sizes), giving you high-force, controlled grip without damaging the prop, shaft, or drivetrain.

What a VEEM Prop Puller Is

• A mechanical puller/pusher tool used on inboard propellers to push the prop onto the taper during installation and pull it straight off the taper for removal.
• Instead of striking with a hammer, this tool applies even force to the hub via internal tapered clamping rings and a forcing mechanism.
• It minimizes shock and stress on the shaft, bearings, keyway and prop hub.

How It Works (Mechanically)

• The puller clamps around or into the prop hub with internal tapered rings.
• As you tighten the central screw or forcing mechanism, the tool draws the prop straight off the shaft taper (or seats it firmly during installation).
• Torque applied converts to radial clamping force and axial pull/push on the hub.

Why It’s Useful

• Protects expensive props and shafts.
• Works in limited space where a traditional C-clamp puller can’t grip blades.
• Provides very high pulling force — often up to several tons — to release stubborn props without shock.

Typical Sizes

• VEEM pullers are offered in different sizes to match common shaft diameters (e.g., 1.75, 2.00, 2.25, etc.) so you choose the tool that matches your inboard shaft.