VEEM Interceptor Strip

VEEM Interceptor Propellers have the colored insert strips in the outer half of the groove and white strips in the inner half.

Interceptor Strips are sold as one (1) each.

Propeller Diameter Range:

• Small 5.90” - (Up to 32″ Propellers)
• Medium 7.87” - (32″ – 42″ Propellers)
• Large 9.84” - (42″ – 54″ Propellers)
• Extra Large 13.77” - (54″ – 68″ Propellers)

Interceptor Strip Height Range:

• White - 0.0mm
• Red - 0.5mm
• Orange - 1.0mm
• Yellow - 1.5mm
• Green - 2.0mm
• Blue - 2.5mm
  
• Grey - 3.0mm

Interceptor Strip Length Range:

• Small - 5.90"
• Medium - 7.87"
• Large - 9.84"
• Extra Large - 13.77"

VEEM Interceptor™ technology has revolutionized the propeller industry by enabling the relative pitch of each propeller blade to be altered in situ to enhance performance.

To remove or install your Interceptor™ strips, use the guide below:

1. Strips are removed by sliding them toward the hub.
2. Cut the new strips so they are 1 inch less than the length of the groove in the propeller.
3. Ensure that the grooves are clean. (Important)
4. Insert Strips by sliding them in from the hub towards the tip.
5. The color strip is inserted, pushing it all the way towards the tip.
6. For removal a little heat may be applied to the underside of propellers blade to expand the metal.